Finding the course from Echo to Hughes starts with a straight line between the two chart fixes. Measure clockwise from north, and the route falls near 300 degrees in the northwest quadrant. True and magnetic bearings can differ because of variation—a small detail that matters when translating a chart direction into cockpit navigation.

Multiple Choice

What is the numeric heading to go from Echo to Hughes?

The main idea is to determine the bearing from one fix to another on a chart. To fly from Echo to Hughes, you plot a straight line between the two fixes and measure the direction from north clockwise to that line. The line to Hughes lies in the northwest quadrant, roughly 60 degrees west of north. Bearings are read clockwise from north, so that direction corresponds to about 300 degrees. If you use true bearings, you’d adjust by magnetic variation to get the magnetic heading, but the course from Echo to Hughes is about 300 degrees. The other headings point in directions that don’t align with the Echo-to-Hughes line (not NW), so they don’t fit.

Reading a Course from Echo to Hughes

A chart gives a pilot a picture of where things are, but the line between two fixes turns that picture into a direction to fly. For a route from Echo to Hughes, the course is about 300 degrees. That number makes sense once you know how bearings are measured: start at north, then count clockwise around the compass until you reach the route line.

This simple method sits at the heart of chart navigation. It also helps explain a useful distinction in helicopter flying: the direction drawn on a chart is a course, while the direction shown on the aircraft’s heading indicator is a heading. They’re closely related, but wind and compass references can make them differ.

Start with the line, not the compass number

To find the direction from Echo to Hughes, first locate both fixes on the chart. Then draw or imagine a straight line from Echo to Hughes. The key is to measure the line from the point where the aircraft begins: direction is not interchangeable with distance, and the reverse route will point somewhere else.

The line from Echo to Hughes lies in the northwest part of the chart. It sits about 60 degrees to the west of north. Since aviation bearings increase clockwise, that route corresponds to roughly 300 degrees.

Here’s the part that can feel backward at first. “Northwest” sounds like a direction near 315 degrees, and the route is indeed in that general area. But a chart’s specific line may sit a little west or east of the compass-point midpoint. So the measured course can be about 300 degrees rather than exactly 315.

A quick mental check helps: 270 degrees is due west, and 360 degrees (the same as 000 degrees) is due north. A course of 300 degrees falls between them, closer to north than west. That matches a northwest-bound route.

Bearings move clockwise from north

A bearing is an angle measured clockwise from a reference direction, usually north. Imagine standing at the center of a compass rose. North is the starting point; east is 090 degrees, south is 180 degrees, and west is 270 degrees. Continue clockwise past west and you reach 300 degrees, then 360 degrees at north again.

That’s why a northwesterly course can have a number greater than 270. The number doesn’t describe how many degrees west of north the aircraft will fly. It describes the clockwise turn from north to the route line.

For the Echo-to-Hughes line, the route is roughly 60 degrees counterclockwise from north. To express that as a clockwise bearing, subtract 60 from 360:

360° − 60° = 300°

This conversion is handy whenever a direction is described in everyday terms—northwest, southwest, or “a little south of east”—but navigation requires a three-digit bearing.

Course, heading, and track: related, not identical

In everyday conversation, people often use course and heading as if they mean the same thing. In flight navigation, it’s worth keeping them separate.

  • Course is the intended direction of travel over the ground, usually measured between two points.

  • Heading is the direction the nose of the aircraft points.

  • Track is the path the aircraft actually follows across the ground.

With no wind, the aircraft’s heading and track may be nearly the same. Add a crosswind, though, and the pilot may need to point the nose slightly into the wind to stay on the desired ground track. Think of walking across a windy beach: you may angle your body into the breeze while still moving toward a point ahead. The same idea applies in the air.

So, about 300 degrees describes the charted direction from Echo to Hughes. The precise heading needed to maintain that route can depend on conditions, aircraft instruments, and the navigation reference being used.

True north and magnetic north

Charts and navigation systems can refer to different kinds of north. True north points toward the geographic North Pole. Magnetic north is the direction indicated by a magnetic compass, and it doesn’t sit in the same place as true north. The difference between them is called magnetic variation.

That matters because a course measured from a chart may be a true bearing, while the aircraft’s compass-based information may be magnetic. A pilot must use the relevant chart notes and procedures to account for variation when converting between the two. The amount and direction of the adjustment depend on the area and the chart’s stated convention; it shouldn’t be guessed from a general rule.

There can also be a difference between magnetic heading and magnetic course when wind correction is needed. Those are separate steps: first identify the route’s direction relative to the chosen north reference, then account for the aircraft and conditions.

A steady way to read any two fixes

The same process works for routes between other named points:

  1. Find the departure fix and destination fix.

  2. Draw a line from the departure point toward the destination.

  3. Identify the direction of that line on the chart.

  4. Measure clockwise from the chart’s north reference.

  5. Check whether the result fits the route’s general direction.

  6. Apply any required conversion between true and magnetic references.

That final check is more useful than it may seem. If a route clearly points northwest but a calculated bearing comes out near 120 degrees, something has gone wrong—perhaps the line was drawn in reverse, the wrong fix was selected, or the angle was read in the wrong direction.

Reverse routes are a common source of confusion. Echo to Hughes is about 300 degrees; Hughes back to Echo points roughly 120 degrees. Those bearings differ by 180 degrees because they describe opposite directions along the same line. The locations haven’t changed, but the starting point has.

Why this matters in helicopter navigation

In a helicopter, a clear route picture can support sound decisions about position, terrain, airspace, and workload. A bearing is only one part of that picture, but it gives the pilot a clean directional reference. In a TH-73A training setting, the habit of identifying the fixes, drawing the route, and reading the chart’s north reference keeps the underlying geometry simple and repeatable.

The important takeaway is modest but powerful: don’t guess from the place names. Read the chart. For Echo to Hughes, the line points northwest, and the clockwise bearing from north is about 300 degrees. Once that compass logic clicks, the number feels less like something to memorize and more like a direction you can see.